Keep It Working. Keep It Catching. Your Commercial Grade Fly Trap is only as good as the board inside it. These pheromone-infused replacement glue boards are what turn UV light attraction into actual fly control — ultra-sticky, non-toxic and designed to stay effective for 1–2 months per board. Ten boards per pack means you're covered for the better part of a year. Why Replace Regularly? A full or dusty glue board is a trap that's not catching to the best of it’s ability. Regular swaps take seconds, cost very little and keep your trap performing at the level your kitchen, café, patio or food prep area demands. This is the lowest-effort, highest-impact maintenance task in commercial fly control. Glue boards only — trap sold separately. Shop the Commercial Grade Fly Trap here.  Key Features Flies Can't Resist It — Pheromone-infused adhesive works alongside your trap's UV LEDs to draw flies in and hold them fast. No escapes, no second chances. Non-Toxic. Food-Safe. Compliant. — Chemical-free adhesive meets Australian food safety standards for commercial kitchens, food prep and serving areas. Safe around staff, customers and food. 1–2 Months Per Board — Each board lasts between one and two months under normal conditions.  Swap in Seconds — The magnetic cover comes off, the board slides out, the new one goes in. No tools, no downtime, no fuss. Discreet and Odourless — Hidden behind the trap's cover, out of sight of customers and staff. No smell, no mess, no disturbance to food environments. Straight in the Bin — Used boards go directly into general waste. No specialist disposal required. How to Replace Your Glue Board Switch off the unit Remove the magnetic cover Slide out the used glue board and dispose of it in general waste Peel the protective film from the new board Slide the new board into position Replace the cover and switch the unit back on Done. Takes less than a minute.

Don't Let a Dead Battery Leave You Exposed. Your Solar Snake Repeller works around the clock to keep snakes off your property — but only if the battery inside it is doing its job. These genuine EnviroBug 3.7V Li-ion rechargeable replacements are purpose-built for your repeller. Stock up, swap out, stay protected. Why Replace with Genuine Batteries? Your snake repeller's vibration output depends entirely on the battery powering it. An ageing or incompatible battery means reduced vibration strength — and reduced protection when you need it most. Genuine EnviroBug Li-ion replacements are matched to your repeller's exact specifications, ensuring it keeps operating at full power season after season. Replacement batteries only — Solar Snake Repellers sold separately. Shop Solar Snake Repellers here.  Key Features Purpose-Built for Your Repeller — 3.7V Li-ion chemistry matched exactly to EnviroBug Solar Snake Repeller specifications. No guessing, no compatibility issues, no compromised performance. Rechargeable. Reusable. Better for the Planet. — Lithium-ion chemistry means these batteries recharge via your repeller's solar panel rather than heading to landfill. Fewer replacements, less waste. 2 Years of Life Per Battery — Genuine EnviroBug Li-ion cells are built to last. Under normal operating conditions, expect two or more years of reliable service per battery. Holds Charge Through Cloudy Days — A fully charged battery keeps your repeller running for up to 10 days without direct sunlight — critical for shaded properties and overcast seasons. Available in Multi-Packs — 2, 4, 6, 8 and 20-pack options available. Stock up for multiple repellers or keep spares on hand for fast swaps. 12-Month Warranty — Backed by our local Aussie team. Fast responses, no runaround. When to Replace Your Battery Your repeller's indicator light is dim or not showing The repeller has been in service for 2+ years Performance feels reduced despite adequate sunlight You're heading into peak snake season and want full confidence in your protection Tip: Swap batteries at the start of spring — before snake activity peaks — so your repellers are running at full strength when it matters most.

Keep the Lure Strong. Keep the Mozzies Coming In. Your Heavy Duty Outdoor Mozzie Trap or Super Indoor Mozzie Trap works by emitting UV light at a precise frequency that mozzies simply cannot resist — but that globe has a lifespan. Once it starts to fade, so does your trap's ability to attract and eliminate. This genuine 7W UV fluorescent replacement globe restores your trap to full luring power. Why Replace Your Globe? UV output degrades over time — often invisibly. Your globe may still glow, but if it's past its useful life, it's emitting significantly less of the precise UV frequency that draws mozzies in, as the glass clouds over time. A fresh globe means your trap is back to operating at the attraction level it was designed for, not a diminished version of it. With 3,000+ hours of useable life per globe, a timely replacement is all it takes to stay ahead of mozzie season. Replacement globe only — trap sold separately. Compatible with Two Traps — Suits both the latest generation EnviroBug Heavy Duty Outdoor Mozzie Trap and the Super Indoor Mosquito Killer Dry Trap.  Key Features Compatible with Two Traps — Suits both the latest generation EnviroBug Heavy Duty Outdoor Mozzie Trap and the Super Indoor Mosquito Killer Dry Trap. One globe, two applications. Back to Full Attraction Power — Genuine 7W UV fluorescent globe matched to your trap's exact specifications. Restores the precise blue-light frequency mozzies can't resist. 3,000+ Hours of Useable Life — Long-life globe keeps your trap performing across multiple seasons before the next replacement is needed. Compatible with Two Traps — Suits both the latest generation EnviroBug Heavy Duty Outdoor Mozzie Trap and the Super Indoor Mosquito Killer Dry Trap. One globe, two applications. Activates the TiO₂ CO₂ System — The UV output reacts with the trap's Titanium Dioxide collar to produce small amounts of CO₂ — mimicking human breath and supercharging mozzie attraction. Swap in Minutes — no trades, no fuss. Simple DIY replacement keeps your trap operational with minimal downtime. When to Replace Your Globe The UV light appears noticeably dimmer than when first installed Mozzie catch rates have dropped despite regular use and correct placement You're heading into peak mozzie season and want full confidence in your trap's performance The globe has been running continuously for an extended season Tip: Replace your globe at the start of spring — before mozzie activity peaks — so your trap is drawing at full strength when you need it most. How to Replace Your Globe Switch off and unplug the trap completely before starting Remove the protective cover from the globe housing Carefully twist the old globe approximately 90 degrees and pull it free Insert the new globe and twist back 90 degrees until secure Replace the cover, plug back in and confirm the UV light is active Done in under two minutes.

Protect Your Repellers. Extend Their Life. Don't Let the Elements Win. Your snake repellers are out there in every condition the Australian climate throws at them — rain, humidity, condensation, frost. They're water-resistant, not waterproof (please remember to bring them in if heavy rains are forecast!). LANOX is the annual maintenance step that keeps moisture and corrosion from quietly degrading the internal components that make your repellers work. One spray a year. Years more protection. Why LANOX? Snake repellers do their job quietly and constantly — which means most people don't think about maintenance until something goes wrong. The reality is that even weather-resistant units are vulnerable to moisture ingress and corrosion over time, especially in coastal, humid or high-rainfall environments. A quick annual application of LANOX to internal components creates a durable lanolin barrier that locks moisture out and keeps everything working exactly as it should. Key Features Shields Your Investment from the Inside Out — Natural lanolin base forms a durable, adhesive film over internal components, blocking moisture, condensation and corrosion before they cause damage. One Spray a Year. Years More Life. — Annual application is all it takes to significantly extend the lifespan of your snake repellers and other outdoor gear. Low effort, high return. Heavy-Duty Protection for Harsh Aussie Conditions — Designed for extreme climatic and high-humidity environments. If it can handle mining equipment and marine hardware, it can handle your property. Completely Safe. No Nasty Chemicals. — Silicon-free, kerosene-free, acid-free and diesel-free. Natural lanolin base derived from sheep wool — biodegradable, safe around gardens, homes and animals. Won't Dry Out or Wash Off — Unlike petroleum-based lubricants, LANOX adheres to surfaces and stays put through rain, humidity and temperature extremes. Versatile Around the Property — Beyond repellers, use it on gate hinges, locks, tools, outdoor electrical connections, fencing hardware and anything else you want protected from the elements. Where to Use It Snake repellers — Apply to internal components annually, especially in humid, coastal or high-rainfall areas Gate hinges and locks — Protects outdoor metalwork from rust and seizing Outdoor tools and equipment — Keeps blades, moving parts and metal surfaces corrosion-free during storage Electrical connections — Non-conductive formula is safe for use on outdoor electrical fittings and terminals Fencing hardware — Spray on staples, wire joins and brackets to prevent oxidation in exposed conditions How to Apply Ensure the surface or component is clean and dry before applying Shake the aerosol can well Apply a light, even coat to the target surface or internal components Allow to settle — LANOX adheres naturally and doesn't require buffing or wiping Reapply annually, or more frequently in extreme coastal or high-humidity environments Tip: Apply to your snake repeller's internal components at the start of each snake season (before you put your repellers back out), before humidity peaks. It takes less than a minute per unit and adds years to the life of your repellers.

Keep Catching. Keep It Chemical-Free. Glue boards only — Bug Magnet trap sold separately. Shop the Bug Magnet here.  Your Bug Magnet works because the glue board inside it works. Once it's full, your trap is just a purple night light. These eco-friendly replacement boards snap in within seconds — six per pack, roughly six months of continuous protection. No sprays, no chemicals, no interruption to your defence. Why Replace Regularly? A saturated or dried-out glue board stops catching — it's that simple. Regular swaps keep your Bug Magnet operating at the attraction level it was designed for, quietly pulling in mozzies, midges, flies and moths around the clock without you having to lift a finger. At roughly one board per month, six boards takes you through an entire season without a reorder. Glue boards only — Bug Magnet trap sold separately. Shop the Bug Magnet here.  Key Features Back to Full Catching Power — Eco-friendly adhesive boards matched exactly to the Bug Magnet trap. Fresh board, full sticky surface, maximum catch rate from the moment you swap it in. Six Boards. Six Months. Sorted. — One pack covers approximately six months of continuous use. Stock up once and forget about reordering until next season. Swap in Seconds. No Tools. No Fuss. — Peel the protective film, slide the board in with the sticky side facing the wall, done. Couldn't be simpler. Zero Chemicals. Completely Safe. — Eco-friendly adhesive with no sprays, no toxins and no chemical residue. Safe for use in bedrooms, kitchens, nurseries and living areas. Works While You Sleep — Your Bug Magnet runs 24/7 at under 2W. Fresh boards mean it's always catching, not just glowing. What It Catches Mozzies, midges, flies, moths and most small flying insects drawn to the Bug Magnet's purple UV light. How to Replace Your Glue Board Touch the button to switch the Bug Magnet off Slide the old glue board out and dispose of it in general waste Peel the protective adhesive film from your new board Slide the new board into the trap with the sticky side facing the wall Switch the trap back on — you're catching again immediately Done in under thirty seconds.

Your Termite Ninja stations work because termites find the bait inside them impossible to ignore. Pure cellulose is the gold standard termite attractant — the same material their colonies depend on for survival. These replacement tablets keep every station in your perimeter fresh, active and drawing termites toward your system and away from your walls, floors or joinery. Why Pure Cellulose? Not all timber attractants are equal. Pure cellulose tablets are specifically processed to maximise termite attraction — stripped of the resins and compounds that might deter feeding, leaving only what termites are hardwired to seek out. It's the most attractive form of cellulose you can put in a station, and that distinction matters when your home is what you're protecting. Cellulose attractant tablets only — killer bait powder and Termite Ninja stations sold separately. Shop Killer Bait Powder here. Shop the Termite Ninja System here.  Key Features Maximum Attraction. Minimum Interference. — Pure cellulose tablets contain nothing that deters feeding — no resins, no preservatives, no compounds that signal danger to a foraging termite. Just irresistible attractant, working around the clock. Keeps Your Perimeter Hot Year-Round — Fresh tablets restore every station's drawing power the moment they're installed. An active, stocked perimeter pulls termites toward your system — not toward your home. No Active Chemicals. Safe for Everyone. — Pure attractant only, with no toxins, no poisons and no risk to humans, kids, pets or native wildlife.  Available in 3, 6, 9 and 12 Packs — Match your pack size to the number of stations you're running. Works Seamlessly with the Full Termite Ninja System — Drop-in replacement for ground, wall, stump, in-ground and patio stations. When to Replace Your Tablets Tablets inside a station appear consumed, reduced or dried out It has been 3–6 months since your last replacement depending on activity level You're heading into spring and summer when termite foraging intensifies A station has just been treated with killer bait and you're returning it to monitoring mode Tip: After confirming colony collapse following a killer bait treatment, replace tablets and return the station to monitoring mode immediately. Even though a collapsed colony won’t come back, neighbouring termite colonies can move into vacated territory — a restocked, active perimeter keeps them from claiming it. How to Replace Your Tablets Check each station through the clear viewing window before opening Open only inactive stations — never disturb a station showing active termite feeding Remove spent or exhausted tablets from the station housing Insert fresh cellulose tablets from your refill pack Close and return the station to its installed position Monitor regularly — check weekly or fortnightly if you have an infestation. Check every 4–8 weeks in active season, every 8–12 weeks in cooler months

You've spotted termite activity in your Termite Ninja station. Now you need the one thing that takes a detection event and turns it into a colony collapse. This is the APVMA-approved killer bait powder that worker termites consume, carry back to the nest and share — all the way to the queen. No poisons. No chemicals harmful to humans or animals. Just a growth regulator that shuts the colony down from the inside out. Killer bait only — Termite Ninja stations sold separately. Shop the Termite Ninja DIY System here.  How the Bait Works The killer bait contains chlorfluazuron — a termite growth regulator (IGR) at 1% per kg of pure cellulose. Worker termites consume it, but it doesn't kill them instantly. Instead it weakens their jaw structure, rendering them unable to eat. As food becomes scarce in the colony, termites turn cannibalistic — and the living termites begin consuming those that have already ingested the growth regulator. The IGR passes vertically through the colony, termite to termite, until it reaches the queen. Colony collapse follows. This is the same mechanism professional exterminators use — without the thousands of dollars in fees, the annual contracts, or the chemical soil treatments. Key Features Takes Out the Whole Colony, Not Just What You Can See — Growth regulator passes from termite to termite through natural colony behaviour, ultimately reaching and eliminating the queen. One application, complete eradication. The Same Active Ingredient Professionals Use — APVMA-approved chlorfluazuron IGR at professional strength. No watered-down DIY formula — the real thing, available to you directly. Safe for Humans, Pets and Native Wildlife — Chlorfluazuron is specifically targeted at termite biology. Completely harmless to humans, animals and the broader environment at the rate used. No Use-By Date — Provided it's kept sealed and dry, this bait has an indefinite shelf life. Stock up without worrying about waste. Available in 2, 5 or 10 Packs — 100g per sachet. Match your pack size to the scale of activity across your Termite Ninja stations. Designed for the Termite Ninja Stacking System — Applied via EnviroBug's innovative stacking method, which places the bait directly above an active station without disturbing the termites inside — critical for keeping them feeding. When to Apply the Killer Bait Apply Killer Bait as soon as you observe termite activity inside a Termite Ninja station — indicated by mud tubes, frass, or visible termite presence through the clear monitoring window.  Tip: Speed matters once you've detected activity. The sooner the bait is applied, the sooner worker termites begin carrying it back to the colony. Don't wait for activity to intensify before acting. How to Apply Confirm activity — Check your station's clear viewing window for signs of termite presence Assemble a treatment station — Prepare a new Termite Ninja station with a sachet of Killer Bait inside Stack it on top — Place the treatment station directly above the active one using the stacking system — this delivers bait without opening or disturbing the active station Monitor regularly — Check every 1–2 weeks for ongoing activity and reapply if needed Look for colony collapse — Activity will slow and eventually cease as the IGR works through the colony to the queen

Your Mozzie Mist is working — don't let it run dry. These genuine citronella refill cartridges snap straight in and give you another 3–7 days of continuous, chemical-free personal protection. No DEET, no sprays, no skin absorption. Just pop it in and get back outside. Refill cartridges only — Mozzie Mist device sold separately. Shop the Mozzie Mist Personal Insect Repeller here.  Why Genuine Refills? The Mozzie Mist's gentle citronella mist is calibrated to disperse at the right rate for the device — not too heavy, not too light. Genuine refill cartridges are matched exactly to the device's output, so you get consistent, effective protection every time.  Key Features Stay Protected. Don't Run Out. — Each genuine citronella refill cartridge delivers 3–7 days of continuous personal protection depending on usage. One cartridge per week, or stock up for the whole season. Same Natural Formula. Every Time. — Citronella-based, chemical-free and non-toxic. The same gentle, pleasant scent that humans enjoy and insects can't stand — safe for babies, kids, pets and sensitive skin. Zero DEET. Zero Compromise. — No synthetic chemicals, no skin absorption, no second-guessing whether it's safe around little ones. Just natural repellent that works. Snap In. Switch On. Done. — Genuine cartridges are designed for instant, fuss-free replacement. No tools, no mess, no wasted mist. Available in Single or Multi-Packs — Stock up for the season, the camping trip or the whole family. Multi-packs offer better value per cartridge and mean you're never caught short. Safe for the Whole Family — Non-toxic, chemical-free and gentle enough for use around babies, children and pets. Take it anywhere. When to Replace Your Cartridge Protection feels less effective or you notice more mozzie activity around you The mist output has visibly reduced You're heading into a high-activity period — camping, outdoor entertaining, dawn and dusk outdoor time You've been using the device for 3–7 days continuously Tip: Keep a spare cartridge in your bag, glove box or camping kit — running out mid-trip is the one thing standing between you and a bite-free evening. How to Replace Your Cartridge Switch the Mozzie Mist device off Remove the spent cartridge from the device housing Insert the fresh cartridge until it clicks securely into place Switch the device back on — protection resumes immediately Done in under thirty seconds.

Your Garden Sentinel is out there in all conditions, firing bursts of water at possums, cats, foxes and birds the moment they set foot in your garden. It runs on four AAA NiMH rechargeable batteries. These genuine replacement batteries restore full operating power instantly. Replacement batteries only — Garden Sentinel sold separately. Shop the Garden Sentinel Motion-Activated Sprinkler here.  Why Replace with Genuine NiMH Batteries? The Garden Sentinel's solar panel recharges NiMH chemistry specifically — using standard alkaline batteries won't work with the solar recharge system and risks damaging the unit. Genuine AAA NiMH replacements ensure your Sentinel recharges correctly during the day and stays powered through night-only and 24-hour operating modes without interruption. Key Features Restores Full 24/7 Protection — Fresh NiMH batteries mean your Sentinel is back to firing on all three cylinders: water, noise and motion — around the clock, day and night modes included. Solar-Compatible Chemistry — AAA NiMH batteries are specifically matched to the Garden Sentinel's solar recharge system.  Set of 4 — Everything You Need — One set replaces the full battery complement in your Garden Sentinel.  Rechargeable. Reusable. Less Waste. — NiMH chemistry recharges via the unit's solar panel automatically. Ready for All Three Operating Modes — Whether you're running 24-hour, day-only or night-only mode, fresh batteries ensure consistent, reliable response every time the IR sensor triggers. When to Replace Your Batteries The Sentinel is firing less frequently or with reduced response The unit is not triggering despite confirmed animal activity Batteries have been in service for 2+ years The solar indicator shows charging but the unit isn't holding power overnightTip: Replace batteries at the start of spring — before peak pest activity season — so your Sentinel is operating at full response when possums, cats and birds are most active in your garden. How to Replace Your Batteries Switch the Garden Sentinel off and disconnect from the water supply Open the battery compartment on the unit Remove the four spent AAA batteries Insert the four new NiMH batteries, observing correct polarity Close the compartment, reconnect to water supply and switch back on Place in sunlight to begin the initial solar recharge cycle

You've already done the hard work — your Termite Ninja stations are in the ground, on the walls, around the perimeter. Now all you need is fresh timber bait to keep them actively attracting. These refill packs give you everything required to restock your monitoring stations and keep your perimeter working year-round, without calling an exterminator or paying for a single inspection. Timber attractant refill only — killer bait and Termite Ninja stations sold separately. Shop Killer Bait Powder here. Shop the Termite Ninja System here.  Why Keep Your Stations Stocked? An empty or exhausted bait station is a station that isn't attracting. Termites need a live, active timber bait source to be drawn in and begin feeding — once the bait is consumed or dried out, your station becomes passive. Regular restocking keeps every station in your perimeter hot, active and pulling termites toward your detection system rather than toward your home. Key Features Keeps Your Perimeter Active and Attracting — Fresh specially prepared timber bait restores your stations' drawing power, ensuring termites are lured toward your system before they find their way into your walls, floors or stumps. No Exterminator. No Inspection Fee. Ever. — Restock your own stations in minutes. No contractor, no annual inspection contract, no $900 fee just to check what you can check yourself through the clear viewing window. Specially Prepared Timber Bait — EnviroBug's recycled timber bait is specifically prepared to be irresistible to termites — not just any wood. It's the right material, prepared the right way, to maximise attraction in every station. Compatible with the Full Termite Ninja System — Designed exclusively for EnviroBug Termite Ninja bait stations. Drop-in replacement that works seamlessly with your existing setup — ground, wall, stump and in-ground stations. Safe for Humans, Pets and Native Wildlife — Pure cellulose timber bait with no active chemicals in the monitoring phase. Nothing toxic, nothing harmful — just a timber attractant that termites can't resist. Available in Multiple Pack Sizes — Match your pack size to the number of stations you're running. Keep spares on hand. When to Restock Your Stations Separate to monthly checks for termite activity, you should thoroughly check your stations every 3–6 months by opening them up and looking at the state of the wooden and cellulose tablet baits. This is especially the case as you're heading into warmer months (when termite activity peaks). Specifically, you should replace your baits when: The timber bait or cellulose tablets inside the station appear consumed, reduced or has got wet You've recently treated an active station and want to return it to monitoring mode Tip: After a successful treatment with killer bait and confirmed colony collapse, restock your stations with fresh timber attractant, cellulose tablets and return them to monitoring mode — termites from neighbouring colonies can move in to fill the territory within 12 months. How to Restock Your Stations Check each station through the clear viewing window for signs of activity before restocking Open inactive stations that show no current termite presence Remove spent or exhausted timber bait and replace with fresh attractant from your refill pack Close and return the station to its installed position Monitor regularly — every 4–8 weeks during active season, every 8–12 weeks in cooler months